Periodic cleaning and care of your new Arxus USA boots will ensure years of comfort and protect your investment.

DAILY CARE

To ensure a long and healthy lifespan for your boots, wipe them clean and rinse them with plain water, particularly after exposure to mud or harsh/caustic conditions. Mud will dry pulling moisture from the natural rubber. Avoid exposure to harsh chemicals (such as ammonia and solvents) and rinse with water as quickly as possible after any such exposure. After rinsing them, allow them to dry naturally away from direct sunlight or artificial heat sources such as radiators, hot pipes, fireplaces and stoves. Heat will dry the natural rubber causing them to eventually crack. Cool, dry conditions are best for the storage of your Arxus USA boots.

BOOT EXTERIOR

Your Arxus USA boots are made using all natural rubber*. To protect the finish and maintain or restore its flexibility and water resilience, we recommend periodic cleaning of the boot’s exterior with cold, soapy water. Never use solvents. After cleaning, allow them to dry naturally.  Then, we strongly recommend application of a high-quality, natural rubber boot care product such as Arxus NanoLatex or Grangers Rubber Boot Care.  It will help to restore the quality, finish and natural moisture-repelling properties of the rubber and is formulated with ingredients that actually work their way into the natural rubber.  Apply liberally over the entire surface of the boot and spread using a soft dry cloth or fine sponge. Note that boot care accessories are not sold separately once your boots have shipped.

BOOT INTERIOR

Your Arxus USA boots have either a neoprene or a poly-cotton lining. Some styles have additional linings for wicking away moisture from the lower part of the boot. Periodically rinsing the interior of your boots will help maintain an environment to keep your feet warm, dry and odor free. Fill the inside of your boot partially with warm water and a mild detergent. Squeeze the top of your boot closed with one hand and shake the boot vigorously for a few seconds. Empty the water and repeat. Allow 24-48 hours for the boot lining to dry. Placing a towel or crumpled newspapers inside the boot will absorb excess water and help accelerate initial drying time. Remove these after a few minutes and allow the lining to completely air dry in a cool place. Never place the boots near a heat source to dry.

ZIPPERS, GUSSETS, AND VENTS

Some Arxus USA boots are equipped with zippers, gussets, or vents. Cleaning and occasional lubrication of these areas will help maintain the condition and comfort of your Gumleaf USA boots.

ZIPPERS

Arxus use Swiss-made Riri zippers in their zipper boots. The zipper will benefit from occasional lubrication. We recommend the use of Gear Aid’s Zipper Lubricant every 3 to 6 months. This will help to maintain the ease with which the boot can be zipped up or down. There is a plastic seal between the bottle and cap of the Lubricant which you will have to remove before its first use. The top of cap with the brush also lifts up and down to avoid spills. Please refer to the Arxus Owner’s Manual you will receive shortly after purchase for boot care instructions. Boot care accessories are not sold separately once your boots have shipped.

GUSSETS AND EXPANDABLE VENTS

Several Arxus styles have a gusset which is the flap or fold along the inside of the zipper. It helps to insure that the interior of the boot remains dry, even if the zipper is down. Cleaning the gusset prior to lubricating the zipper is recommended. Some Arxus styles such as the Pioneer, Pioneer Nord and Jodhpur incorporate an expandable vent. Clean the gusset or vent by removing any dirt or excess debris and using a damp cloth or towel. Apply NanoLatex or Grangers Rubber Boot Care periodically to the inside of the gusset (facing the zipper) or vent to maintain their soft, pliable condition.

STRAPS

Many Arxus USA boots include a functional canvas strap to provide an optimal fit around the calf of your leg. Periodically clean the strap with water and mild detergent. Do not ‘muscle’ or over-tighten these straps as you can damage the strap or the clamp. Boots with torn straps from over tightening are not covered under Warranty.

BLOOMING

Occasionally, you may notice a white powdery “bloom” on your Arxus USA natural rubber boots. This is quite common in natural rubber and will not affect the performance or durability of your boots. NanoLatex and Grangers Rubber Boot Care will help prevent blooming.

• Arxus USA boots have a very high natural latex rubber content to which some people (less than 1%) are allergic.  If your skin breaks out in a rash or becomes itchy upon first trying your boots on inside, remove them and contact us for a free return.  Do not wear your boots outside or for any extended period.